The Teats from AGN Enterprises are reusable laboratory and educational accessories designed to provide a flexible rubber or elastomeric attachment for compatible droppers, pipettes, glass tubes, and similar laboratory components.
Their tapered construction allows convenient finger-operated suction and dispensing when fitted to a suitable glass or plastic tube. They can be used in school laboratories, colleges, universities, biology laboratories, chemistry laboratories, medical teaching laboratories, and general scientific laboratory applications.
| Cat. No. | Type | Rubber Type | Capacity (mL) | Pack of |
| AGN.6727.01 | Conical | Silicon Rubber | 1mL | 10 |
| AGN.6727.02 | Conical | Silicon Rubber | 2 to 3mL | 10 |
| AGN.6727.03 | Conical | Natural Rubber | 1mL | 10 |
| AGN.6727.04 | Conical | Natural Rubber | 2 to 3mL | 10 |
| AGN.6727.05 | Round | Natural Rubber | 1mL | 10 |
| AGN.6727.06 | Round | Latex Rubber | Small | 10 |
| AGN.6727.07 | Round | Latex Rubber | Large | 10 |
Laboratory teats are small flexible components commonly used with compatible pipettes or droppers for controlled handling of small quantities of liquid.
By compressing and releasing the teat, the user can create suction that draws liquid into the attached tube. Gentle pressure can then be used to dispense the liquid.
The displayed Teats feature an elongated tapered shape with a wider opening at one end.
This design provides a convenient gripping surface while allowing the open end to be fitted onto a compatible laboratory tube, pipette, or dropper.
Compatibility depends on the dimensions of the teat and the laboratory component being used.
The teats are manufactured from a flexible material suitable for repeated compression during routine laboratory handling.
Flexibility allows the teat to return toward its original shape after pressure is released, creating the suction required for drawing liquid into an attached dropper or pipette.
Exact material composition should be confirmed according to the supplied product specification.
When attached correctly to a compatible tube, the teat can be compressed before the tube tip is placed into a liquid.
Releasing pressure draws liquid into the tube, while subsequent controlled compression dispenses the liquid.
These teats are intended for simple transfer or dropwise dispensing rather than high-accuracy volumetric measurement unless used as part of an appropriately calibrated system.
Depending on size and compatibility, the teats may be used with:
The fit should be checked before use to prevent leakage or accidental detachment.
Laboratory teats are useful accessories for practical demonstrations involving liquid transfer, reagent addition, sample preparation, qualitative analysis, and basic laboratory techniques.
Their simple operation makes them suitable for teaching environments where students are learning fundamental liquid-handling procedures.
Material compatibility should be checked before using the teat with chemicals, solvents, acids, alkalis, or other reagents.
Some elastomeric materials may swell, deteriorate, soften, or become brittle after exposure to incompatible chemicals.
Users should follow the applicable laboratory safety procedures and material-compatibility recommendations.
Where the supplied teat is intended to be reusable, it should be cleaned using a method compatible with its material and the substances handled.
Cross-contamination should be avoided when teats are used with different samples or reagents.
Damaged, cracked, hardened, contaminated, or poorly fitting teats should be replaced.
The Teats can be used for:
AGN Enterprises supplies laboratory accessories, glassware, scientific instruments, educational laboratory equipment, anatomical models, and research products for schools, colleges, universities, hospitals, laboratories, and research institutions.
Our laboratory accessories support routine scientific work, practical demonstrations, education, and research applications.
