Definition :-
Specifically designed for growth of the Algae in flasks. It provides adequate space with controlled temperature, humidity and light conditions.
Specification :-
Volume : 600 Liters
Illumination : Four Tier LED Light
Type : Horizontal shape
Inner Working area : 2m2 .
Access Port : 1.25″ One
CO2 range : 1 to 10 %
Interface : Graphical interface
Controller : Programmable controller
Sensor inputs : Three wires RTD sensor inputs
Plant growth height : 30 cm on each tier
Temperature : 15° to 45°C (±0.5°C)
Safety : Alarm, the controller shut down the chamber and restart when the temp returns to normal system restart automatically when the internal temp is normal.
Touch screen controller : High definition IPS (1280 x 800)
Monitoring : Microprocessor Based Touch Screen for real time monitoring.
Display : Trend graphs Display directly on screen for both Set-point and Actual conditions
Programs : Display current set-points and process values, alarm status, alarm settings, program operation mode, program steps and controller time
Certification : ISO certified UL-508A/CE
Applications :-
This chamber is specifically designed for algae with higher light intensity requirements Also, frequently used for short plants with moderate light intensity requirements
Features :-
– Used for cooling and bypass-based heating.
– Uniform light intensity over entire shelf on Both tier.
– Air circulation inside chamber adjustable air diffuser
– Lift-off hinge design allows for simple removal of door
– Top Mounted Air-cooled condensing unit with hot gas bypass system
– Ceiling mounted evaporator coil incorporates twin air circulation fans
– Solenoid valves have extended stem for quiet and long-life operation.
– The system restart automatically when the internal temp is normal.
– One door providing full access to chamber interior, magnetic gasket, with observation window in front of door with light cover
– The LED light cool white in color.
– Tier Light Measured @6” From Lamp Bank.
– Run 24 hour multi-steps program in ramping mode, non-ramping mode, run non-24 hours program in elapsed time
– Sequence multi-step programs , Dual experiment protection, two calibration offsets per input channel, Light lifetime maintenance activated
– The accumulated hours can be reset for each output
– Three wires RTD sensor inputs, visible alarm displays with audible buzzer
– Power failure event logging
– Ambient temperature monitoring
– Digital lighting control, troubleshooting with up front Diagnostics Menu
– Uniform Light Intensity programmable from 15 to 100% dimmable 300μmoles
– Shelve and light canopy adjustable in ½” increments also removable without any tool.
– Temperature safety alarm, the controller shut down the chamber and restart when the temp returns to normal.
Accessories :-
– Power socket 15 Amp -2Nos
– CO2 Cylinder
– Co2 Regulator
– Voltage stabilizer
– Cord & plug
– Warranty Card
– Instruction Manual
